Publicidad
Idiomas disponibles
Idiomas disponibles
WHAT TO DO IF YOUR MULTI-COOKER
Problems
My multi-cooker does not work.
What do I do?
I plugged in my appliance but it
switched itself off.
I unplugged my appliance because I
made a setting mistake, but when I
plug it again, the cooking program
can not be changed.
Display issue
IS NOT WORKING PROPERLY
Plugging issue.
The product switched into standby
mode.
The product was not unplugged long
enough. The cooking setting saved
in memory was not reset.
Condensation inside the display
panel due to intensive cleaning.
Possible causes
Solutions
Check that the multi-cooker is
correctly plugged in. If need be,
unplug it and plug it back in again.
Check that your power socket is
working.
Press the power button once to
leave standby mode. If nothing
happens, unplug the product then
wait 2 minutes and plug it again.
Unplug the product for at least
2 minutes before plugging it in
again.
Let the product dry over night. If
problem appears again, take the
appliance to an approved Service
Center.
EN
19
Publicidad
