Descargar Imprimir esta página

all-clad SD800D51 Guia Del Usuario página 9

Publicidad

Idiomas disponibles

Idiomas disponibles

If HI/LO mode is chosen : (this mode is used to start the cooking on HIGH and then switches to LOW
automatically) :
Enter the cooking time for HI by pressing
Press
and enter the cooking time for LO by pressing
Press
button to start the cooking.
While cooking you can change the cooking time :
Press
and change the cooking time for HI by pressing
Then press
to enter the cooking time for LO by pressing
Press
to exit from settings and continue cooking.
When the cooking cycle is complete, the multi-cooker will automatically shift to KEEP WARM mode. "WM" will
be shown on the display screen, and the timer will start counting up.
The KEEP WARM can be used for up to 6 hours. For dense recipes, it is recommended to stir during the KEEP WARM.
When the KEEP WARM is finished, the multi-cooker will shut off.
The graduated markings on the inside of the insert are given in cups.
These are used for measuring the amount of water needed when cooking rice.
The plastic cup provided with your appliance is for measuring rice and the table states the quantity of rice
required for the number of servings. 1 measuring cup of rice weighs about 5 oz.
The maximum quantity of water + rice should not exceed the 10 cup mark inside the insert.
Place the appliance on a flat, stable, heat-resistant work surface away from water splashes and any other sources
of heat.
Measure the rice using the plastic measuring cup provided and rinse thoroughly in cold water before cooking.
or
R I C E C O O K I N G
or
or
or
.
EN
9

Publicidad

loading