Temperature Control - Heraeus 6000 Serie Instrucciones De Uso

3.3 Temperature
Control
Mechanical
temp, controller
"Heratherm"
Models 6030 - 6200 only
Temperature
range:
20 - 50°C
Setting:
Use a screwdriver to release the locking device of the
temperature controller.
Note the marking ! (^g)f
Select the desired working temperature with the control
knob.
Tighten the locking device again.
Note the marking !
+
<
The set working temperature, once reached, is kept
constant with the controller opening and closing the heating
circuit as required. The white pilot lamp indicates that the
heating is working.
If the chamber temperature and dial readout do not match,
the setting must be corrected, (see Appendix).
50012338
- 11 -