Skil SB2001C-00 Manual Del Propietário página 16

Adjusting the Chute
The chute can be adjusted to change both the direction and the pitch of the discharged snow
to assist you in moving snow away from one area and placing it in another.
The direction of snow removal can be adjusted up to 180° (Fig. 7a).
1. Turn the remote chute-rotation handle or the front chute-rotation handle leftwards to rotate
the chute to the left (counterclockwise).
2. Turn the remote chute-rotation handle or the front chute-rotation handle rightwards to
rotate the chute to the right (clockwise).
The throwing distance (or the pitch) of the snow blower is adjusted by moving the chute
deflector up or down (Fig. 7b). Release bail switch before adjusting the chute deflector.
1. To increase the distance that the snow is thrown, squeeze the trigger on the chute-
deflector handle, and then raise the chute deflector. Release the trigger on the chute-
deflector handle to lock the chute deflector in place (Fig. 7b).
2. To decrease the distance that the snow is thrown, simply lower the deflector with the
chute-deflector handle.
WARNING
through the gap and back at the operator, resulting in serious personal injury.
WARNING
Fig . 7a
Remote Chute-
rotation Handle
Front Chute-rotation
Handle
16
Do not force the chute so far forward that a gap appears between the
deflector and the chute itself. Snow or other debris could be thrown
Do not adjust the chute deflector while the bail switch is engaged.
Always release the bail switch before adjusting the chute deflector.
Fig . 7b
Trigger
Chute-deflector
Handle
Chute Deflector