Descargar Imprimir esta página

Garland XTRIM 900 PG Manual De Instrucciones página 25

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
2.4. SECURITY WHEN USING FUEL
IMPORTANT: The fuel used is highly inflammable.
If the fuel or the machine catch fire, fight the flames
with a dry dust fire extinguisher.
Petrol and oil are dangerous, avoid contact
of oil or petrol with skin and eyes. Do not
inhalate or drink. If oil or petrol has been
drunk, visit your doctor straight away. If you come into
contact with petrol or oil, clean yourself with plenty of
water and soap as soon as possible. If after this, you
still feel your eyes or skin are itchy visit your doctor
straight away.
Gasoline and oil are extremely flammable
and explosive under certain conditions. Do
not smoke while preparing or refueling.
Do not refill fuel in areas where flames,
sparks or hot sources are. Refill only in
ventilated areas with engine off.
Do not overfill the fuel to try to overfill the fuel tank. In
case of fuel leakage, eliminate these before starting
the machine, do not attempt to start the engine but
move the machine away from the area of spillage
and avoid creating any source of ignition until petrol
vapours have dissipated.
Do not refill fuel in closed areas or near flames.
Refill fuel before to start the machine. Do not unscrew
the combustible tank cap while the engine is running
or engine is hot.
Make sure the gas cap is properly closed while
operating the machine. Be sure to properly close the
gas cap after refueling.
Store fuel in a bottle or tank homologated and
according to current regulations.
Do not use petrol that has been stored for over two
months. Petrol that has been stored for too long will
make the start up of the machine more complicated
and will cause the engine to underperform. If the
petrol has been in the machines petrol deposit for a
period exceeding two months, remove and substitute
the petrol before using the machine.
2.5. USE AND CARE OF THE MACHINE
Only use this trimmer to cut grass. Any other
use could be dangerous and at your own risk.
Do not use the brush cutter for other jobs for which
it has not been designed. For example: do not use
the brush cutter to cut logs or other wooden objects,
plastic materials, bricks and construction materials.
The use of this brush cutter for jobs different to those
stipulated can create dangerous situations.
Use this machine and its accessories according to
the instructions provided and taking into account
working conditions and work to be done. The use of
this machine for jobs different to those stipulated can
cause danger.
Check that all security elements are installed and in
good working condition.
Remember that it is the end user operating the
machine who is responsible for any danger or
damages caused to other people or things. The
manufacturer will not in any case be held liable for
damages caused by an incorrect use of this machine.
Do not force the machine over its capacity. Use the
machine for the correct job. The use of the machine
for its proper job, will ensure that you work better and
more safely.
Do not use this machine if the open and closed
switch does not work. Any machine that cannot be
25/124
English

Publicidad

loading

Este manual también es adecuado para:

Xtrim 900 pg-v20