Garland XTRIM 900 PG Manual De Instrucciones página 39

10. TRANSPORT
It is always neccesary to turn off the motor before
transporting the machine between work locations.
Wait 5 minutes before switching off the motor to
transport the machine.
Always carry the machine with the motor off, with the
machine hanging from the harness and use the blade
guard installed keeping the machine always high so it
does not touch the ground.
If you are going to transport the machine in a vehicle,
make sure you secure the machine safely to avoid the
machine from sliding or falling over from side to side.
11. STORING
Wait 5 minutes after the turned off for it to cool before
storing or transporting the machine.
The exhaust pipe of the machine will remain hot after
the motor shutdown. Do not ever store the machine
closer to flammable material (dry grass, wood...) gas
or fuel.
Make sure that you store the machine in a location not
accessible to children.
If you are going to store the machine in a closed place
drain the fuel and the oil of the deposits because the
steam could contact with a flameo r a hot element
and swollen.
Make sure the engine is cold before storing the machine.
The exhaust pipe of the machine will remain hot after
the motor shutdown. Do not ever store the machine
closer to flammable material (dry grass, wood...) gas
or fuel.
12. RECYCLING OR DISPOSAL OF
YOUR MACHINE
Protect the Environment. Recycle used oil
by this machine and take it to a recycling or
follow local recommendations. Do not empty
into drains, soil, rivers, lakes or seas.
Dispose of your machine in an ecological
manner. We should not get rid of the
machine with our domestic rubbish. Its
plastic and metal components can be
reclassified and can be recycled
39/124
English