Samsung MNNQ70M6650DS Manual Del Usuario página 67

Information codes
Displayed
Possible cause
Code
This code occurs if the control key is
C-d0
short for 1 minute.
This code occurs if the door lock is
C-d1
mispositioned.
This code occurs if communication
C-F0 between the Main and Sub PBA is
interrupted.
This code occurs if communication
C-F2 between the Main and Touch is
interrupted.
The cooking sensor is open when
the microwave is operating.
C-10
The cooking sensor is short when
the microwave is operating.
The oven sensor is open when the
oven is operating.
C-20
The oven sensor is short when the
oven is operating.
Solution
Clean the buttons and make
sure there is no water on/
around them. Turn off the
oven and try again. If the
problem continues, contact
a local Samsung service
center.
Touch OVEN OFF, and then
restart the oven. If the
problem persists, disconnect
all power to the oven for at
least 30 seconds and then
reconnect the power. If this
does not solve the problem,
call for service.
Displayed
Possible cause
Code
This code occurs if the internal
C-21
temperature rises abnormally high.
The temp probe sensor is short
C-23
when the oven is operating.
The PCB sensor is open when the
oven is operating.
C-30
The PCB sensor is short when the
oven is operating.
This code occurs if the PCB
C-31
temperature rises abnormally high.
The Steam sensor is open when the
oven is operating.
C-70
The Steam sensor is short when the
oven is operating.
There are drain system-related
C-72
problems.
The cooling motor is operating
C-A2
abnormally.
Solution
Touch OVEN OFF, and then
restart the oven. If the
problem persists, disconnect
all power to the oven for at
least 30 seconds and then
reconnect the power. If this
does not solve the problem,
call for service.
Call for service
Touch OVEN OFF, and then
restart the oven. If the
problem persists, disconnect
all power to the oven for at
least 30 seconds and then
reconnect the power. If this
does not solve the problem,
call for service.
Call for service.
English 67