Installation; General; Analyzer Specifications - BD Veritor Plus Analyzer Instrucciones De Uso

BD Veritor™ Plus Analyzer Instructions for Use
Pathogenic microorganisms, including hepatitis viruses and Human Immunodeficiency Virus, may be present in clinical specimens.

Standard Precautions and institutional guidelines for the handling of biohazardous materials should be followed in handling all items
contaminated with blood and other body fluids.
Protection provided by this equipment may be impaired if the equipment is used in a manner not consistent with the instructions in

this manual.
2.1

General

This section provides specifications for installation and setup of the BD Veritor Plus Analyzer, plus the optional BD Veritor InfoScan Module
and BD Veritor InfoSync Module. The following major topics are included:
•

Analyzer Specifications

• Analyzer Setup
• Printer Setup
• Module Specifications
• Module Setup
PROTECTION PROVIDED BY THIS EQUIPMENT MAY BE IMPAIRED IF THE EQUIPMENT IS USED IN A MANNER
2.2 Analyzer Specifications
Physical Specifications
Length
Width
Height (including feet)
Weight (Analyzer)
Weight (Analyzer and installed module)
Electrical Specifications
The BD Veritor Plus Analyzer is provided with an auto-switching power supply with recommended input
Supply of 100–240 VAC at 50–60 Hz, 0.6 A.
Voltage
4
2 – Installation
NOT CONSISTENT WITH THE INSTRUCTIONS IN THIS MANUAL.
The Analyzer power requirement is 5.0 VDC ± 5%, 1500 mA.
WARNING
14.3 cm
9.0 cm
7.6 cm
300 g
350 g