Data Download To A Pc - BD Veritor Plus Analyzer Instrucciones De Uso

USB Port Unlock
Scan the USB Port Unlock barcode supplied with the Analyzer to enable download of test results to a computer. The port only remains unlocked
for the current power cycle.
4.8

Data Download to a PC

The BD Veritor Plus Analyzer stores a data record of every test performed on a secured drive. Accessing the data requires:
• Installation of the optional BD Veritor InfoScan Module or BD Veritor InfoSync Module (see section 2.6)
• Access to the USB Port Unlock Barcode, included with the Analyzer
• A USB cable (USB-A to micro-B) (included with the InfoScan module only)
• A PC with an available USB 2.0 port (not included)
After installation of the BD Veritor InfoScan Module or BD Veritor InfoSync Module, results can be accessed by:
1 Place the BD Veritor Plus Analyzer on a flat, dry, stable surface.
2 Ensure that the BD Veritor Plus Analyzer is not in direct sunlight or exposed to a bright light.
3 Check the BD Veritor Plus Analyzer for an inserted device. If a device is present, remove it from the Analyzer.
4 Press the front panel power button. The BD Veritor Plus Analyzer will complete a self-test before it is ready for use.
5 When the display window reads SCAN CONFIG BARCODE, scan the USB Unlock Barcode. If the drive has been successfully
unlocked, the display window will read USB PORT UNLOCKED.
6 Connect the BD Veritor Plus Analyzer to a PC by plugging the micro-B connector into the USB port of the BD Veritor Plus Analyzer and the
A plug into a free USB port on the PC. The on-board memory will be associated as "BD Analyzer" with two unused drive letters on the
attached PC; only one drive is accessible. Using a file utility such as Windows Explorer, copy the file RECORD.CSV to the PC. This file may
be opened in a spreadsheet program such as Microsoft Excel or in a text editor. Note that the on-board drive is read-only and cannot be
modified. Also note that all records are reported in Coordinated Universal Time (UTC), also known as Greenwich Mean Time (GMT).
After the secured drive is unlocked, it will remain unlocked until the power is turned off. To access the drive again, the
unlock barcode scan procedure must be repeated. Users should take care to cycle power immediately after completing
NOTE
the data download process to prevent unauthorized access.
19