Topcom BPM WRIST 2511 Manual De Usuario página 11

TOPCOM BPM WRIST 2511
12 Memory
AM
PM
mon. d
mem.
AM
PM
mon. d
mem.
When the batteries are installed, the data in the memories
will not be lost even when the Blood Pressure Monitor is
switched off.
Remove the batteries for more than 10 seconds to erase the
memories.
All manuals and user guides at all-guides.com
The BPM 2511 has two Memory zones. Each can
store up to 50 measurements including the date
and time
The result will be stored automatically in the
selected Memory Zone after the measurement.
Select the desires Memory Zone before
measurement.
• Press the MEMORY ZONE button to
activate the display. The actual selected
Memory Zone is displayed.
• Press the Memory Zone button again to
select the memory zone 1 or 2 in which you
want to store the measurement result.
• Press the POWER button to switch the unit
off.
To recall measurement results:
• Press the MEMO button to activate the
display.
• Press the MEMORY ZONE button to select
the memory zone 1 or 2 from which you
want to recall the measurement result.
• Press the MEMO button to confirm. The
calculated avarage of all measurement
together is displayed.
• Press the MEMO button again to see the
last measurement result.
• Press the MEMO successively for prior
values stored.
11