gel-o-mat E LEGANCE 50/II K Instrucciones Para Instalación Y Mantenimiento página 35

2. CONTROL PANEL AND RELATIVE SYMBOLS
A
A) Switching – On / STAND BY key
B) Regeneration key (optional)
C) Drain key
D) Extra cold rinse key (optional)
E) Info key
F) START key to start up cycle / select cycle
G) Display
3. PROGRAMMING - SETTING THE PARAMETERS - SERVICE MENU 15
Some parameters are adjustable upon diff erent application needs.
To set the parameters you enter by a key into the
Machine switch ON. To enter the
Select the key 15. In some menu sections it is necessary to modify the single cell (the one with the green background).
Use keys B (increase) and
pressing the key Start F.
Use keys B (increase) and
the selection of every digit by pressing the key
It appears the available parameters menu. Use keys
modify. Confi rm the selection by pressing the key
Programming
1 5
key menu
The display shows a screen which confi rms the modifi cation. If no selection is entered within 50 seconds, the machine
returns to the previous status.
Press key On/Off A to exit without saving the settings.
SERVICE MENU
Language
Date and time
Washing time P0
Dripping time P0
Rinse time P0
B G
C
SERVICE
SERVICE MENU
C (decrease) to select the key
C (decrease) to select the technical password (default 1111) by digiting the single digit. Confi rm
Start
Start
Programming
1/4
D F
E
MENU.
keep pressed for about 4 seconds, both the
15 setting the single digits. Confi rm the selection of every digit by
F. If a wrong password is entered, the relevant warning appears.
B (increase) and C (decrease) to select the parameter you need to
F.
1 1 1 1
Password
CONFIRMATION
EN
On/Off A and Start F
Password
Wrong
page 35
keys.