Publicidad
Idiomas disponibles
Idiomas disponibles
en-us_main.book.book Page 28 Wednesday, February 15, 2023 10:43 AM
28 OPERATION
temperature display is calibrated to your
satisfaction.
1
Press Settings
repeatedly until
a
shows in the display.
2
Use the number buttons
number of degrees you want to adjust the
oven temperature. The temperature
adjustment is shown next to
adjust the temperature up or down by 35 °F
or 19 °C.
3
To lower the temperature, press Settings
to add a minus sign (-) to the displayed
number. To raise the temperature, press
Settings
to remove the minus sign in the
a
display.
4
Press START
to accept the change.
e
NOTE
• This adjustment does not affect the broiling or
Self Clean temperatures. The adjustment is
retained in memory after a power failure. The
oven temperature can be adjusted by ±35 °F (±19
°C).
• Once the temperature is adjusted, press
Settings repeatedly until
see the amount you adjusted and change it if
needed.
• The temperatures displayed by an oven
thermometer placed in the oven cavity may
differ from the actual set oven temperature in all
modes.
Turning the Preheat Alarm Light On/
Off
When the oven reaches its set-temperature, the
preheating alarm light flashes 5 times or until the
oven door is opened.
You can activate or deactivate the preheating
alarm light.
AdJU b
to enter the
c
. You can
AdJU d
a
is displayed to
AdJU
1
Press Settings repeatedly until
the display.
2
Press 1 repeatedly to select the light on/off.
3
Press START to accept the change.
Adjusting the Beeper Volume
1
Press Settings repeatedly until
in the display.
2
Press 1 repeatedly to select Hi, Lo or Off.
3
Press START to accept the change.
NOTE
• Adjusting the beeper volume does not affect the
preheat alarm volume.
Selecting Fahrenheit or Celsius
Set the oven temperature display to show either
Fahrenheit (℉) or Celsius (℃) units. The oven
defaults to Fahrenheit unless changed by the user.
1
Press Settings repeatedly until
in the display.
2
Press 1 repeatedly to select F (Fahrenheit) or C
(Celsius).
3
Press START to accept the change.
Adjusting Cooktop on Alert Volume
1
Press Settings repeatedly until
in the display.
2
Press 1 to select Hi, Lo, Off.
3
Press START to accept the change.
appears in
PrE
appears
8EEP
appears
UNit
appears
CtOP
Publicidad
