MBM PLG74T Manual De Uso E Instalación página 40

LOCATION OF MAIN COMPONEN-
TS - see SECT. IMAGES - REF. n)
The layout of the figures is purely indi-
cative and can undergo variations.
A) Cooking grill.
B) Lava stone.
C) Lava stone grid.
D) Oil/ash drainage container (700
Model) / Ash only drainage container
(900 Model)
E) Burner adjustment knob (see
Knobs, keys and indicator light modes
and functions).
F) Piezoelectric button.
G) "Briquette" lava stone
H) Cooking fat drainage container
(900 Model)
KNOBS, KEYS AND INDICATOR
LIGHT MODES AND FUNCTIONS
see SECT. IMAGES - REF. o).
The layout of the keys in the figures is
purely indicative and can be subject to
variations.
PIEZOELECTRIC BUTTON
1
(GAS). It performs one function:
1. When pressed, it produces the
spark to ignite pilot light.
BURNER REGULATION KNOB
2
(GAS): It performs three functions:
1. Igniting the pilot light and burner.
2. Adjusting the flame (minimum - ma-
ximum).
3. Turning the appliance off.
STARTING PRODUCTION
Before proceeding see chapters
2 / Residual Risk and 5 / Daily
Activation
When loading the product into
the appliance and unloading
it, there is a residual risk of being
burnt; this risk can occur coming
into unintentional contact with: hob
- cooking compartment - recipients
or material processed.
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
INSTRUCTIONS FOR USE
LAVA STONE LOADING / see SECT.
IMAGES - REF. n) / Lift and remove
cooking grills (part.A).
Distribute uniformly in the proper lo-
dging the lava stone contained in the
sack supplied (about 6 kg) to grant
the stability of the grills on the splash-
guard (part. B).
Place again the cooking grills previou-
sly removed.
SWITCHING ON / see SECT. IMA-
GES - REF. p)
Turn the knob while holding it in
•
the piezoelectric position (Fig.2/A),
and simultaneously press the pie-
zoelectric button several times
(Fig.2/B) until the pilot light is lit.
Release the knob after about 20"
•
and check to make sure the pilot
light remains lit.
The pilot light can be seen through the
hole on the panel.
When the pilot light has been lit, turn
the thermostat knob to the desired
temperature (Fig.2/C).
With the dual control (2 thermo-
stat knobs) the temperature acts
on half the surface of the plate for
each control (Fig.3/A).
LOADING/UNLOADING THE PRO-
DUCT / see SECT. IMAGES - REF. p)
Check that the cooking fat draina-
ge container is present and positio-
ned correctly (900 Model - Det. E)
Do not use pans or other contai-
ners to cook on the grill.
Wait for the correct temperature
to be reached before placing
food on the grill.
Flip the cooking grid depending to
desired cooking mode: Method A
- see Fig. 3B / Method B - see Fig. 3C
- Lean food cooking
Place the product onto the cooking
grill of the hob (Fig. 3).
- 16 -
8.