Service And Maintenance - Altrad Belle PRO TROWEL 900 Manual Del Operador

MAINTENANCE
The Belle Group Pro Trowels are designed to give many years of trouble free operation. It is, however, important that the simple
regular maintenance listed in this section is carried out. It is recommended that an approved Belle Group dealer carries out all major
maintenance and repairs. Always use genuine Belle Group replacement parts, the use of spurious parts may void your warranty.
Before any maintenance is carried out on the machine, switch off the engine. If working on a petrol engined machine, disconnect the
HT lead from the sparkplug.
Running In Period
When the trowel is ¿ rst used from new, the engine oil must be changed after the initial running in period.
(see engine manual for full detail).
Routine Maintenance
Engine Oil Check Level
Change
Air Filter Check Condition
Clean / Replace
Spark Plug Check / Clean
Cutout Switch Check
Belt Tension Check
Oil/Fuel Type & Quantity - Spark Plug Type
Gasoline GX160
Engine
Gasoline EX17
Engine
Gasoline GX270
Engine
Gasoline EX27
Engine
Gearbox
Note:
- Check the gearbox oil at regular intervals and top-up when necessary. Make sure the oil is at the centre of the sight glass. To ¿ nd
out what grade of oil should be used in the gearbox, please contact the Belle group Warranty Department (+44 (0)1298 84606)
- Grease Spider Arm Assembly prior to storage and at regular intervals.

Service and Maintenance

Daily
9
Oil Type Quantity
SAE 0.16gal
10W-30
SAE 0.3gal
10W-30
SAE 0.3gal
10W-30
SAE 0.3gal
10W-30
EP90 0.16gal
after ¿ rst ¿ rst month
4 hours / / 20 h
Weekly
9
9
9
9
Fuel Typ Capacity
Unleaded 0.66gal
Unleaded 0.95gal
Unleaded 1.59gal
Unleaded 1.61gal
NA NA
26
3 month 6 month
/ 50 h / 100 h
9
9
9
9
Spark Plug Electrode
Type Gap
BM4A or 0.6 - 0.7mm
BMR4A
NGK 0.6 - 0.7mm
BR-6HS
NGK 0.7 - 0.8mm
BPR-6HS
NGK 0.6 - 0.7mm
BR-6HS
NA NA