Special information concerning vehicles with parking distance control (PDC)
On vehicles with PDC it is possible to deactivate the PDC for trailer operation using the toggle
switch located on the centre console. Alternatively, the PDC may be deactivated electronically.
17. Lay the brown/white cable from the right tail light (Fig. 2/4) to the PDC control unit (Fig. 2/8)
and connect it.
Note
If you have any queries concerning the PDC deactivation procedure, please contact the
nearest garage.
Checking correct operation
18. Reconnect the ground of the vehicle's battery.
19. Check the trailer function with the help of a suitable test instrument (with load resistors) or
with the help of a trailer.
20. Secure all cables using cable ties.
21. Refit any parts removed for installation.
24
313 174 391 101 26/04
Installation instructions:
Electrical system for towing hitch
DC Vaneo