Gaggenau RC472704 Instrucciones De Uso página 16

en-us
Operating the appliance
Setting the temperature unit
You can choose between the unit °C and °F.
1. Press à button to open the main menu.
Press B button to move to the menu item Basic
2.
settings.
3. Press ™ button.
4. Press B button to move to the menu item Temperature
unit.
Press % button.
5.
6. Press B C buttons to move to the required unit.
Press ™ button.
7.
The unit will be changed.
8. Press ' button to exit the menu.
Setting the language
Press à button to open the main menu.
1.
2. Press B button to move to the menu item Basic
settings.
3. Press ™ button.
Press B button to move to the menu item Language.
4.
5. Press % button.
Press B C buttons to move to the required language.
6.
7. Press ™ button.
The display restarts, and the start screen is displayed.
Resetting to the factory settings
Press à button to open the main menu.
1.
2. Press B button to move to the menu item Basic
settings.
3. Press ™ button.
Press B button to move to the menu item Factory
4.
settings.
5. Press % button.
A signal tone sounds, and a message to confirm reset
appears.
Press ™ button.
6.
All settings are reset to the factory settings.
7. Press ' button to exit the menu.
16
Switching demo mode on or off
The cooling function of the appliance is switched off. All
other functions can be used.
Note: Do not store any food items in demo mode as the
appliance remains at room temperature.
1. Press à button to open the main menu.
Press B button to move to the menu item Basic
2.
settings.
3. Press ™ button.
4. Press B button to move to the menu item Demo mode.
Press % button.
5.
6. Press B C buttons to select the setting On or Off.
Press ™ button.
7.
The setting is saved.
Press ' button to exit the menu.
8.
Rest mode
The appliance switches off the following:
Automatic door opening
▯
Note: With handle-free installation, please note that
you will not be supported when opening the door
during this time.
To open the door in this case, reach from below under
the bottom panel of the unit.
Audible signals
▯
Interior light
▯
Messages on the control panel
▯
Background illumination of control panel is reduced
▯
Switching Rest mode on or off
Displaying or hiding rest mode in the main menu
To use rest mode, you first have to display the function in
the main menu:
1. Press à button to open the main menu.
2. Press B button to move to the menu item Basic
settings.
Press ™ button.
3.
4. Press B button to move to the menu item Rest mode.
Press % button.
5. Press C buttons to move to the menu item Available or
Not available. Confirm by pressing ™ button.
6. Press ' button to exit the menu.
The function is displayed or hidden in the main menu.
Switching rest mode on
1. Press à button to open the main menu.