Publicidad
Idiomas disponibles
Idiomas disponibles
User instructions
When the function is activated, opening of the door must not be
impeded in any way; do not leave anything in the space in front of the
door necessary to allow it to open. Do not re-close the door during
automatic opening as this would damage the mechanism. Wait for the
pushers to retract before re-closing the door.
SPREAD HALF LOAD
When there are not many dishes to be watched, the "spread half load"
option, controlled by button
is useful; it saves water and electricity
and reduces the program's duration. Place dishes in both baskets then
load the detergent dispenser than less than the normal amount for a full
load..
EXTRA OPTIONS - "3/1" BUTTON
Press buttons 6 + 8 (EXTRA PROGRAMS button + ENERSAVE option
button) simultaneously to activate the "3/1" option; the respective light
comes on to confirm the selection. The option is optimised for use of
detergents which are complete with salt and rinse aid, known on the
market as "3 in 1", "triple action", etc. With this option activated, any salt
and rinse aid If you wish to use detergents which already contain salt and
rinse aid already in the dishwasher will not be used.
N.B.: even with the "3/1" option selected, the regenerating salt/rinse aid
lights will still stay on if their containers are empty.
IMPORTANT: the option continues to be active until it is deactivated by
pressing buttons 6 + 8 simultaneously; the light will then go out.
3/1 products are not suitable for use with excessively hard water.
Therefore, if the water hardness is set higher than H3, the 3/1 OPTION
light flashes to indicate a setting error. This does not prevent the use of
the option, but the washing results might not be of the best.
9
Publicidad
