Descargar Imprimir esta página

Fulgor Milano FDW8292.1 Instrucciones De Instalacion Y Uso página 68

Ocultar thumbs Ver también para FDW8292.1:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 155
BEFORE STARTING THE DISHWASHER AFTER PROLONGED
DISUSE:
TROUBLESHOOTING MINOR PROBLEMS
In some cases it is possible to remedy minor problems by referring to the
following instructions:
If the program fails to start, check that:
If water remains inside the dishwasher, check that:
If the dishes are not being cleaned properly, check that:
30
User instructions
Check that there are no deposits of sludge or rust inside the water
pipe: if there are, allow the water to run from the water supply tap for
a few minutes.
Plug the power cord back into the socket.
Reconnect the water intake hose and open the tap again.
the dishwasher is connected to the electrical power supply;
there is no power failure;
the water tap is open;
the dishwasher door is properly closed.
the door won't close > the door latch was released > use greater
strength to close the door.
the drain hose is not kinked;
the drain siphon is not obstructed;
the dishwasher filters are not clogged.
the correct amount of detergent has been added;
there is regenerating salt inside the special container;
the dishes are being loaded correctly;
the selected program is suitable for the dish types and their degree of
soiling;
all the filters are clean and positioned correctly;
the spray arm nozzles are not obstructed;
there is no object obstructing the rotation of the spray arms.

Publicidad

loading

Este manual también es adecuado para:

Fdw82103