VOLTOMAT HEATING OR22RC-9 Manual Del Usuario página 15

GB
PARTS DESCRIPTION
1. Heating elements
2. LCD
3. Mode button
4. "＋" button
℃/℉ switch button
5.
6. "－" button
7. ON/OFF button (Heating selection)
8. Built-in handle
9. Power switch with indicator light
10. Cord storage
11. Wheels
WHEELS ASSEMBLY
1. Turn the heater upside down.
2. Assemble the four wheels to the two base shelves.
3. Traverse the clips through the appliance body and base shelves.
4. Position the wheel base assemblies between the end fins.
5. Tighten the screws.
Caution: Do not operate the oil heater without correctly assembled wheels.
USING THE APPLIANCE
Plug the appliance and press the power switch to the position "－" to connect the appliance with the
⚫
power supply. The appliance will send a beep sound and the power switch illuminates.
Turn on the appliance by pressing the ON/OFF button. The LCD will have a number "88" flickering and a
⚫
"
" image at the top right corner. If you press the ON/OFF button again, the image will turn to
Continue to press the button, you will see the image
levels. is the high heating level (2000W);
heating level (800W). Select the heating level as you want. If you press the ON/OFF button again after
seeing the appliance will be turned off.
,
Press the mode button, a thermometer icon will flicker on the LCD. Press the "＋" or "－" button to
⚫
increase or reduce the temperature. The appliance will work to maintain your set temperature. The
thermometer icon keeps flickering throughout. The temperature you can set is from 13℃ （55℉） to
30℃ （86℉）.
After use, turn off the appliance by pressing the ON/OFF button. As the ON/OFF button is also used for
⚫
heating selection, you have to press the button more than one time to turn off the appliance if the
heating is not set at the low level. When the appliance is turned off, the LCD will turn to dark. Then, turn
These three images represent three heating
.
is the middle heating level (1200W);
- 14 -
.
is the low