Ulysse Nardin UN-118 Manual De Instrucciones página 5

TI ME S E T TI N G
Unscrew and pull the crown out to position D.
Make sure the hands are properly showing either am or pm,
otherwise the date will change at noon instead of midnight.
Turn the hands clockwise to the desired time.
Push the crown back to position B, then press slightly to
engage the threads and turn to screw the crown down. The
water-resistance can only be guaranteed when the crown is
correctly screwed down.
DATE SE T T I NG
Unscrew the crown and pull out to position C. Rotate in any
direction until the required date appears in the window.
Important : do not use quick corrector between 10:00 pm
and 01:00 am; doing so may result in damage to the calen-
dar mechanism.
POW E R RE S ERV E I NDI CATO R
The self-winding movement is fully wound when the hand
on the counter at 12 o'clock is on the up position opposite
to "0". The movement has a power reserve of approximately
60 hours.
U LYS S E NA R DI N C ERT I FI CATI O N
Ulysse Nardin's certification does not only certify the move-
ment performance but the timepiece as a whole (after set-
ting the dial and hands and encasing). Its rigid tests are a
testimonial to the skills of Ulysse Nardin's watchmakers and
engineers.
5