Publicidad
Idiomas disponibles
Idiomas disponibles
USING THE TIMER AS A MINUTE MINDER
1. Make sure the cooktop is turned on. And zone selection key is not
activated (zone indication '-' is not blinking).
Note: you can set minute minder before or after cooking zone power
setting finished.
2. Touch timer key, '10' will show in the timer display and '0' will blink.
3. Set the time by touching the '-' , '+' control of timer.
4. Touch timer control again, then '1' will flash.
5. Set the time by touching the '-' , '+' .
6. When the timer is set, it will begin to count down immediately. The display
will show the remaining time.
7. Buzzer will beeps for 30 seconds and the timer indicator shows '- -' when
the setting time finished.
USING THE TIMER TO SWITCH OFF ONE OR MORE COOKING ZONES
1. Touching the heating zone selection control that you want to set the timer
for.
2. Touch timer control, the '10'will show in the timer display, and the '0'
flashes.
3. Set the time by touching the '-' , '+' control.
4. Touch timer control again, the '1' will flash.
5. Set the time by touching the '-' , '+' control.
6. When the time is set, it will begin to count down immediately. The display
will show the remaining time.
NOTE: there will be a red dot in the right bottom corner of power level
indication which indicating that zone is selected.
7. When cooking timer expires, the corresponding cooking zone will be
switch off automatically.
NOTE: other cooking zones will keep operating if they are turned on
previously.
56
Publicidad
