Publicidad
Idiomas disponibles
Idiomas disponibles
•
If the cable is damaged or needs replacing, this should be done by an after-sales technician
using the proper tools, so as to avoid any accidents.
•
If the appliance is being connected directly to the mains supply, an omnipolar circuit-breaker
must be installed with a minimum gap of 3mm between the contacts.
•
The installer must ensure that the correct electrical connection has been made and that it
complies with safety regulations.
•
The cable must not be bent or compressed.
•
The cable must be checked regularly and only replaced by a proper qualified person.
62
Publicidad
