Beurer BM 95 Instrucciones De Uso página 58

Problem
The device will not switch on.
The cuff does not inflate.
The blood pressure measure-
ments are very high/low.
Stored measured values can
no longer be retrieved from
the memory.
The ECG measurement does
not start even though there is
contact with the skin.
Possible cause
The batteries are flat.
The batteries have been in-
serted incorrectly.
The cuff line is not correctly
inserted into the device.
The cuff is ruptured.
The cuff was not attached
correctly.
You moved or talked during
the measurement.
The measurement was ob-
structed by clothing.
Old measured values have
been overwritten by more
recent values as the memory
is full.
Insufficient contact pressure.
58
Solution
Replace the batteries.
Re-insert the batteries, observing
the correct polarity (-/+).
Ensure that the cuff line is correctly
inserted into the device.
Replace the cuff. Contact
Customer Services.
Re-attach the cuff.
Do not move or talk during the
measurement.
Ensure that clothing cannot obstruct
the arm cuff during the measure-
ment.
Download the stored measured
values to your computer every
so often.
Ensure that the lower electrode
is pressed firmly against the skin.