COSY ARTEVINO Modo De Empleo página 30

II-b. Description (multi-temperature model)
A B C
L
A
Lighting mode
B
Temperature zone concerned
C
Sensor fault alarm
D
Temperature alarm
E
Access to settings and confirmation key
F
Selection and setting keys
III-b. Temperature setting
Recommended setting range for the lowest temperature: 7 - 9 °C / 45 - 48°F.
Recommended setting range for the highest temperature: 17 - 20 °C / 63 - 68°F .
Press and hold down the
1
Press the key for approximately 5 secs
The display will start to flash
2
Press the or
lower part of the cabinet.
3
Press the key to confirm.
The display on the right will flash.
13
D B
K J I
key for 5 secs to start.
.
5 sec. 5 secs
keys to set the temperature of the
E F G
H F
G
Lighting mode access and confirmation key
H
Standby key
I
Highest temperature in the cabinet display
J
Hot circuit operating indicator
K
Cold circuit operating indicator
L
Lowest temperature in the cabinet display
4
Press the or
upper part of the cabinet.
5
Press the key to confirm.
• For the lowest temperature, the default setting is 8°C / 46°F.
However, the temperature can be set from 6 - 10°C / 43°F.
• For the highest temperature, the default setting is 18°C / 64°F.
However, the temperature can be set from 15 - 20°C / 59 - 68°F.
N.B.:
– To operate correctly, your cabinet must be placed in a room with a
temperature of 12 - 30°C / 54 - 86°F.
– A difference of at least 10°C / 50°F is recommended between the
setting values of the low and high temperatures.
The temperature shown on the display is the actual
temperature inside the cabinet. It is therefore necessary
to wait for your new setting to take effect.
The tactile keys are very sensitive. There
is no need to apply force, a light touch is
sufficient to register the command.
Remember to remove your finger from
the panel between each press.
keys to set the temperature of the