COSY ARTEVINO Modo De Empleo página 32

9- Operating faults
Possible incidents
The pictogram is displayed
The pictogram is still
displayed despite having taken
the above corrective action
The pictogram is flashing
The appliance cannot lower the
humidity level to the desired value
The pictogram is displayed
I cannot switch on the cabinet
The compressor is not working
If your appliance does not seem to be operating correctly, contact your Artevino stockist.
Minimum duration of guarantee offered by the manufacturer: 2 years parts.
When starting up
ANY WORK CARRIED OUT BY TECHNICAL SERVICES NOT APPROVED BY ARTEVINO SHALL
INVALIDATE THE WARRANTY.
USING A GLASS DOOR CAN AFFECT THE PERFORMANCE OF YOUR WINE CABINET IS CERTAIN
EXTREME TEMPERATURE CONDITIONS (>30°C).
15
Causes Corrective action
The temperature Check that the door is closed.
has not returned to
Check the condition of the door seal.
the permitted ±4 °C
If you loaded your cabinet with a large number of bottles in the last few
in relation to the
hours, wait a while then check again.
temperature setting
If the alarm continues, contact your ArteVino stockist.
Operating fault Unplug the cabinet and contact your ArteVino retailer.
The relative humidity Add a glass of water to the humidity cartridge
level has been
In order to know how often to add water, count the number of days
< 50% for over 72 hrs
separating the 1st day you added water and the day the pictogram
was displayed.
After a few hours the pictogram will disappear.
/ Empty the cabinet, remove the humidity cartridge and clean the tray.
If the problem persists despite having carried out these different
procedures, call your ArteVino stockist.
Temperature sensor Unplug the cabinet and contact your ArteVino retailer.
fault alarm
/ Check that the wall socket is supplied with power by plugging in
another electrical appliance.
Check that the power lead is correctly connected on the cabinet side.
/ Unplug the cabinet and contact your ArteVino retailer.
(see chapter 6, § IV).