Publicidad
Idiomas disponibles
Idiomas disponibles
HL1400
(C)
HL1700
(C)
HL2400
• To connect high pressure hose to gun, locate
the latch and connection port located in front
of gun trigger, push the latch (A) toward trigger
and insert hose connector (B) release latch to
lock hose to gun. Make sure it is connected by
slightly pulling on the hose.
To release the hose from the gun, push the latch
on the bottom of the gun toward the trigger. The
hose will slide ouT.
• Don't forget to lubricate the ring of the high
pressure hose, in the rear part of the left side
(C) there is a tube to fill with suitable lubricant,
just press the tabs on the button and the bottle
will slide out of the machine.
(A)
(C)
Place on the tip of the
hose to lubricate
Uncap
To lock the spray gun trigger, make sure the
power washer is off (0). Aim the spray gun
away from you and squeeze the lock button
located on the bottom of the gun (A) after doing
so, squeeze or pull the trigger to make sure it is
Connect
locked and will not move.
filter
Connect
filter
• To connect the high pressure gun and lance.
Insert the extension lance (A) into the end of
the high pressure gun in a vertical position,
push both at the same time and rotate them
towards you simultaneously until they click into
place (B). To remove it, press the lance towards
the gun and turn counterclockwise.
• To fill the detergent tank.
Remove the detergent container from the back
of your pressure washer, unscrew the cap
and fill it with detergent. Screw back to close.
Adjuts the detergent flow with the regulator on
the lid and return the container to the back of
your pressure washer.
(B)
• Apply the detergent on the desired area using
the PRO foam spray nozzle connecting it to the
spray lance.
25
(A)
(B)
(A)
(C)
(A)
(B)
Publicidad
