Publicidad
Idiomas disponibles
Idiomas disponibles
pressure in the high pressure hose by squeezing
the trigger 2-3 times, then lock the gun by sliding
the lock button. To use the cleaning needle (B).
insert the wire into the hole in the nozzle and
move in and out until debris is dislodged. Supply
water through the nozzle with a garden hose at
the highest pressure available or use your thumb
on the hose to create pressure for the water
stream.
(A)
To clean the filter
• Remove the water hose.
• Disassemble the water filter and rinse the
parts with clean water.
From time to time, depending on the hardness
of your tap water, calcium deposits form on
the product and accessories. Use a mixture of
water and vinegar for descaling. Mix one part
vinegar and two parts hot water in a suitable
container.
Throw
into the mix. Leave the parts in the mix for
approximately 12 hours. Then rinse the parts
with clean water
8. Storage
• When the pressure washing session is
complete, turn the power switch to the off
(0) position, unplug the power cord from the
outlet, and turn off the water supply. Squeeze
the trigger on the spray gun 2-3 times to drain
excess water and release any remaining water
(B)
pressure. Disconnect the garden hose from the
water inlet. DO NOT allow pressure washer to
operate without water flowing through it.
• Remove the lance and/or detergent bottle
from the gun. Be sure to discard any remaining
detergent from the bottle. Rinse bottle and
nozzle head with fresh water to prevent
clogging.
• Do not store near ovens or heat sources, it can
dry out the pump seals.
• Before storing, wash the detergent tank with
clean water.
• Store the unit in a place inaccessible to
children.
• Store pressure washer and accessories in a
dry, temperature controlled environment. Do not
store the pressure washer and its accessories
where the temperature drops below 4°C (40°F).
28
detachable
accessories
Publicidad
