Publicidad
Idiomas disponibles
Idiomas disponibles
children sit, stand, or climb on the appliance.
•
Do not store toys and similar objects in cabinets above the
hob. Children climbing on the hob could be seriously
injured.
•
Do not leave children alone or unattended in the area
where the appliance is in use.
•
This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by
children without supervision.
•
Do not repair or replace any part of the appliance unless
specifically recommended in the manual. All other servicing
should be done by a qualified technician.
•
Do not use a steam cleaner to clean hob.
•
Do not place or drop heavy objects on the hob.
•
Do not stand on your hob.
•
Do not use pans with jagged edges or drag pans across the
ceramic glass surface as this can scratch the glass.
•
Do not use any scrubs or harsh abrasive cleaning agents to
clean the electric hob to avoid scratches on the ceramic
glass.
Model
L
50788
590
Under any circumstances, make sure the electric hob is well ventilated a nd t he a ir inlet a nd outlet are n ot blocked. Ensure the
electric hob is in a good work state.
6 Note: The safety distance between the hotplate and the cupboard above the hotplate should be at least 760mm.
A(mm)
760mm
2. Before locating the fixing brackets
The unit should be placed on a stable, smooth surface (use the
packaging). Do not apply force onto the controls protruding
from the hob.
Easy Fit kits
There is one easy fit kits package for each hob, include fixing
clips and screws (for ceramic hob total 2 pcs clip and 2 pcs
screw, for induction hob total 4 pcs clip and 4 pcs screw). Find
the easy fit kit package first.
Fix clips to hob
W
H
520
56
B(mm)
50mm minimal
•
If the power supply cable is damaged, it must only be
replaced by a qualified technician.
•
This appliance is intended to be used in household and
similar applications such as: -staff kitchen areas in shops,
offices and other working environments; -farm houses; -by
clients in hotels, motels and other residential type
environment; -bed and breakfast type environment.
3 Installation instructions
The appliance must be installed and connected in accordance
with the standard current regulations.
After u npacking t he a ppliance, ensure there i s n o visible
damage. If the appliance has been damaged during transit, DO
NOT USE. Contact the dealer immediately.
1. Selection of installation equipment
Cut the work surface according to the sizes as shown.
Minimum 5 cm space must be preserved around the hole for
the installation purpose.
Be sure the thickness of the work surface is at least 30mm.
Please select heat-resistant work surface material to avoid
larger deformation caused by t he heat radiation from the
hotplate. (measure by unit: mm)
1
Seal
D
52
C(mm)
20mm minimal
Insert the fixing clips into fixing holes reserved on 2 sides of the
housing, fix a clip to the housing with a screw, then insert hob
into cabinet/work surface.
Fix hob to cabinet
Insert the hob into the cabinet/work surface, the mounting
clips on the sides can secure your hob sturdily.
3. Connecting the hob to the mains power supply
The power supply should be connected in compliance with the
EN-3
A
B
555+5
495+5
555-0
495-0
D
Air intake
X
50 mini
E
Air exit 5mm
Publicidad
