Publicidad
Idiomas disponibles
Idiomas disponibles
4.4
Using Booster Function-Induction Hob
It's with Booster function for all cooking zones. You can use
the "Booster" function to boost the power of the relevant
cooking zone for a maximum power rating for 5 minutes.
This function could reduce the cooking time, which is conve-
nient for cooking when in a hurry!
To use booster function when the hob is working, follows
below:
1. To activate the cooking zone and to use booster function:
Touch the heating zone selection control button to select
the cooking zone you want to use with boost function.
2. Touch the Booster function control button
zone indicator will show "B" and flashes for 5 seconds then
stops, the Booster function is activated.
5 Note
•
When using booster function, if the other cooking zone is
also working and the power setting is higher than level 2,
the programmer will auto turn the power setting of the
other zone to level 2.
•
After booster finishes, the cooking zone will return to the
original setting.
Cancel the Booster function
•
Repeat above steps deactivate Booster function.
•
You can also cancel Booster function by adjusting the power
level setting.
4.5
Flexible Areas-Induction Hob
Model has Flexible cooking areas. The Flexible cooking areas
can each be used as a single zone or as two independent
zones, according to the cooking needs.
Flexible areas are each made of two independent inductors that
can be controlled separately. When working as a single zone,
cookware is moved from one zone to the other one within the
flexible area keeping the same power level of the zone where
the cookware originally was placed, and the part that is not
covered by cookware is automatically switched off.
6 Important: Make sure to place the cookware centred on
the single cooking zone. In case of big pot, oval, rectangular
and elongated pans make sure to place the pans centred on
the cooking zone covering both crosses.
4.5.1 Active the flexible induction area
To activate a flexible area as a single big zone, first press either
of the two cooking zone selection buttons of this flexible area,
then press the flexible area control button. When flexible area
works, the indicator above corresponding flexible area control
button lights up, the power level indicator flashes. You can
adjust the power level of the flexible area by slide the slider.
4.5.2 Deactivate the flexible induction area
To deactivate the flexible area when it works, press either of the
two cooking zone selection buttons of this flexible area, when
power level indicator flashing, press the flexible control button
again. The indicator will turn off.
4.6
Child Lock Safety Control
You can lock the controls to prevent unintended use (for
, the heating
example children accidentally turning the cooking zones on) by
active Child Lock function.
When the controls are locked, except the ON/OFF control
button and Child Lock control button, disables rest of the touch
control buttons.
4.6.1 To lock the controls
Child Lock control
button
Touch the Child Lock control button once. The timer indicator
will show "Lo" and Child Lock function is active.
4.6.2 To unlock the controls
1. Make sure the electric hob is turned on.
2. Touch and hold the Child Lock control button for 3 seconds,
the buzzer beeps once, and "Lo" disappears in timer
indicator, the Child Lock is deactivated.
3. You can now start using your electric hob.
Under the child lock mode, all controls button are disabled
except the ON/OFF button and child lock button.
You can always turn the hob off with the ON/OFF control in an
emergency, but you must unlock the hob first in the next
operation.
5 Note: Under Child Lock function, if turn the hob off
without inactive the Child Lock function. When turning on the
hob later, the Child Lock function will be still active.
4.7
Stop and Start function
Make cooking easy! When cooking, your doorbell rings,
phone rings. Need to step out of the kitchen?
The Stop and Start function can turn off all zones. When you
are back, with one touch of the
carry on cooking.
1. Activate Stop and Start function
To activate Stop and Start function, you can press the Stop and
Start function button once. Then all programmes setting is
paused and hob stops heating, all heat setting indicators show
"P".
2. Inactive Stop and Start function
EN-6
ON/OFF control
button
button, hob restarts to
Publicidad
