Publicidad
Idiomas disponibles
Idiomas disponibles
INOXPAN S.L.
SETTING THE TEMPERATURE CONTROL
• The unit has a single adjustable temperature zone. The temperature can be set between 5°C
and 20°C (41°F and 68°F). It can be used as a wine maturing cabinet or a wine serving cabinet.
The recommended temperature setting range for maturing wine is between 11°C and 14°C
(52°F and 57°F). The recommended temperature setting range for serving white wine is
between 5°C and 10°C (41°F and 50°F) and the recommended temperature setting range for
serving red wine is between 15°C and 20°C (58°F and 68°F).
• When the unit is plugged in for the first time, the unit will power up automatically to the preset
defaults. The temperature preset at the factory is 12°C (54°F) (ideal maturing temperature).
• Touch the Setting Selector
use the UP and DOWN keys to set the internal temperature as required. When you touch either
key at the first time, the display will show the last temperature set previously.
• The temperature will increase 1°C/1°F if you touch the UP key once, or the temperature will
decrease 1°C/1°F if you touch the DOWN key once. The display flashes while you make the
setting.
• The set temperature will temporarily flash in the display for 5 seconds after the temperature
has been set. Then the display shows the current inner temperature again.
• To view the set temperature at any time, touch the Setting Selector
will temporarily flash in the display for 5 seconds. Then the display shows the current inner
temperature again.
SETTING THE HUMIDITY CONTROL
• Humidity level can be kept automatically for models with humidity pump.
• Touch the Setting Selector
and DOWN key to choose the relative humidity setting from 50% to 80% and 00%. The set
humidity will temporarily flash in the display for 5 seconds. Then the display shows the current
inner humidity again. The humidity preset at the factory is 70% (ideal wine storage humidity).
• When 00% is selected, the humidity pump will be switched off. The humidity pump increases
the energy consumption of the unit. If the function is not necessary, please switch it off. The
rated energy consumption is based on the function is switched off.
until the temperature you want to set is flashing. Then you can
until the humidity display
21
WINE CABINETS
key, the set temperature
is flashing. Now you can use the UP
Publicidad
