+GF+ RPC D/PID Manual De Instrucciones página 28

Type RPC D/PID positioner
5.5 Circular connector
2
1) X1 - Round plug M12, 8-pin
Pin Assignment
1 Not assigned
2 Not assigned
Supply voltage
3 GND
4 +24 V (24 V DC ±10 % max. residual ripple 10 %)
Input signals from the control station (e.g., PLC)
5 Binary input +
6 Binary input -+
Output signals to the control station (e.g. PLC) - (only used with binary output
option)
7 Binary output 1 (referred to pin 3)
8 Binary output 2 (referred to pin 3)
2)4) X7 - Fieldbus connection M12, D-coded
Pin Assignment
1 Transmit +
2 Receive +
3 Transmit -
4 Receive -
28
3 4
1 FE
No. Designation
1 X1 - Round plug M12, 8-pin
(Supply voltage)
2 X7 - Fieldbus connection M12 D-coded (2
port Ethernet switch)
3 X5 - round plug M8, 4-pin (only type RPC
PID) Input signals Process actual value
4 X7 - Fieldbus connection M12 D-coded (2
port Ethernet switch)
5 Slide switch (loosen screw connection for
operation)
FE FE Functional earth
3
4
5
6
Plug image
3
2
Operating Instructions
2
1
8
7
4
1