hillvert HT-BC-800 Manual De Instrucciones página 31

7) Assemble the flexible shaft on the clutch cover.
Installing cutting blade and head
1) Put the angled bar (1) into the side holes of the gear case (2) and the plate (3) so as to fasten
the axle.
2) Mount the blade (4) and the washer (5) onto the axle.
3) Mount the washer (6) and the nut (7). Fasten tightly anti-clockwise.
Installing cutting head
1) Put the angled bar (1) into the side holes of the gear case (2) and the plate (3) so as to fasten
the axle.