hillvert HT-BC-800 Manual De Instrucciones página 37

WARNING
• Make sure to use harness and cutting attachment guard. If not, it is very dangerous when you slip
or lose your balance.
Cutting method
• Cut with the front left side.
• Guide the blade from your right to left with it tilted slightly to your left.
• When mowing a wide area, start working from your left end.
• The blade may be seized by weeds if the engine speed is too low, or the blade cuts too deep
into weeds. Adjust the engine speed and cutting depth according to the condition of object.
WARNING
• If the grass or other object gets caught in the blade, or if the unit starts to shake or vibrate, turn off
the engine and check the whole unit. Change the blade if it has been damaged.
• Turn off the engine and make sure the blade has completely stopped before checking the blade,
and removing any object got caught in.
3.5. Maintenance
WARNING
• Always be sure to stop the engine before inspecting the device for problems or performing
maintenance.
• Never alter the brush cutter or take the engine apart.
System components
Fuel leaks, fuel
spillage
Fuel tank, air filter,
Procedure
Wipe out
Inspect/clean
Before Every Every Every
use 25h 50h 100h

 
Note
Replace if necessary