Publicidad
Idiomas disponibles
Idiomas disponibles
1 – Fuel filter
Spark plug
• Starting failure and misfiring are often caused by a fouled spark plug. Clean the spark plug and
check that the plug gap is in the correct range. When replacing a spark plug, use the correct type.
• Periodically clean the spark plug and check that the spark gap is in the correct range.
IMPORTANT
• Note that using any spark plugs other than those designated may result in the engine failing to
operate properly or in the engine becoming overheated and damaged.
• To install the spark plug, first turn the plug until it is finger tight, then tighten it a quarter turn more
with a socket wrench.
• Tightening torque: 9.8~11.8 N
Troubleshooting guide
Case
Check
Starting failure
fuel tank
fuel filter
sparking (no spark)
spark plug
Engine starts but
fuel tank
does not keep
muffler, cylinder
running/ Hard re-
air cleaner
starting
cylinder fin, fan cover
Disposing of used devices
Do not dispose of this device in municipal waste systems. Hand it over to an electric and electrical device
recycling and collection point. Check the symbol on the product, instruction manual and packaging. The plastics
used to construct the device can be recycled in accordance with their markings. By choosing to recycle you are
making a significant contribution to the protection of our environment.
Contact local authorities for information on your local recycling facility.
Probable causes
incorrect fuel
fuel filter is clogged
spark plug is fouled/wet
plug gap is incorrect
disconnected
incorrect fuel or staled fuel
carbon is built-up
clogged with dust
clogged with dust
Action
drain it and with correct fuel
clean
clean/dry
correct (gap: 0.6~0.7mm)
retighten
Drain it and with correct fuel
Wipe away
Wash
Clean
Publicidad
