Gaggenau RB282705 Instrucciones De Uso página 17

4.
The refrigerator has now set up its own WLAN
network with the network name HomeConnect.
You can now access this network with your mobile
device.
5.
Call up the WLAN settings in the settings menu of the
mobile device.
6.
Connect the mobile device with the WLAN network
HomeConnect.
Password: HomeConnect
It can take up to 60 seconds to establish the
connection.
7.
After successfully connecting, open the Home
Connect app on the mobile end device.
The app will search for the refrigerator.
8.
As soon as the refrigerator has been found, enter the
network name (SSID) and the password (Key) of your
own home network (WLAN) into the corresponding
fields.
Confirm with Transmit to domestic appliances button.
9.
If the connection is successful, On flashes up in
–
the freezer compartment temperature display.
You can now connect the refrigerator with the app.
– If the freezer compartment temperature display
shows OF, no connection could be established.
Check whether the refrigerator is located within
the range of the home network (WLAN).
Repeat the process.
Connecting the refrigerator to the Home Connect app
Press · button.
1.
The refrigerator compartment temperature display
shows Cn.
Keep pressing –/+ refrigerator compartment button
2.
until the refrigerator compartment temperature display
shows PA and the freezer compartment temperature
display shows OF.
Press –/+ freezer compartment button to connect the
3.
appliance to the app.
The freezer compartment temperature display shows
an animation.
As soon as the refrigerator and the app are
connected, the freezer compartment temperature
display shows On.
4.
Open the app and wait until the refrigerator is
displayed.
Press Add to confirm the connection between the app
and the refrigerator.
If the refrigerator is not automatically displayed, click
on Add appliance in the app and follow the
instructions. As soon as your refrigerator is displayed,
add it with +.
5.
Follow the instructions in the app until the process is
complete.
The refrigerator compartment temperature display
shows PA and the freezer compartment temperature
display shows On.
The refrigerator has been connected to the app.
If the connection fails, check whether the mobile
device is connected to the home network (WLAN).
Then try to establish the connection again.
If Er appears in the freezer compartment temperature
display, reset the Home Connect settings.
Note: On resetting, all Home Connect settings are
reset.
Verifying signal strength
You should verify the signal strength if no connection can
be established.
Press · button.
1.
The refrigerator compartment temperature display
shows Cn.
Press –/+ refrigerator compartment button until the
2.
refrigerator compartment temperature display shows
SI. In the freezer compartment temperature display, a
value appears between 0 (no signal) and 3 (full
signal).
The signal strength should be at least 2. If the signal
strength is too weak, the connection may be
interrupted.
– Place the router and refrigerator closer together.
– Check that screening walls do not interfere with
the connection.
– Alternatively, install a repeater to make the signal
stronger.
Resetting Home Connect settings
If there is a problem when trying to establish a
connection, or if you would like to register the appliance
in a different home network (WLAN), the Home
Connect settings can be reset:
1. Press · button.
The refrigerator compartment temperature display
shows Cn.
Press –/+ refrigerator compartment button until the
2.
refrigerator compartment temperature display
shows rE and the freezer compartment temperature
display shows OF.
en-us
Home Connect
17