Descargar Imprimir esta página

ALEAPOW P10 Manual De Instrucciones página 11

Publicidad

Idiomas disponibles

Idiomas disponibles

Minimum gauge for Cord sets
Volts
120V
240V
Ampere Rating
More Than
not More Than
0
6
10
12
Do not place any object on top of the charger or place the charger on a soft surface that might block
the ventilation slots and result in excessive internal heat. Place the charger in a position away from
any heat source. The charger is ventilated through slots in the top and the bottom of the housing.
Do not operate the charger with a damaged cord or plug–have them replaced immediately.
Do not operate the charger if it has received a sharp blow, been dropped or otherwise damaged in
any way.
Do not disassemble the charger; Incorrect reassembly may result in a risk of electric shock, electro-
cution or fire.
Disconnect the charger from the outlet before attempting any cleaning. This will reduce the risk of
electric shock. Removing the battery pack will not reduce this risk.
NEVER attempt to connect 2 chargers together.
The charger is designed to operate on standard 120V household electrical power. Do not attempt
to use it on any other voltage. This does not apply to the vehicular charger.
WARNING: Shock hazard. Do not allow any liquid to get inside the charger. Electric shock may
result.
WARNING: Burn hazard. Do not submerge the battery pack in any liquid or allow any liquid to
enter the battery pack. Never attempt to open the battery pack for any reason.
CAUTION: Burn hazard. To reduce the risk of injury, charge only ALEAPOW rechargeable battery
packs. Other types of batteries may overheat and burst resulting in personal injury and property
damage.
CAUTION: Under certain conditions, with the charger plugged into the power supply, the charger
can be shorted by foreign material. Foreign materials of a conductive nature, such as, but not limited
to, grinding dust, metal chips, steel wool, aluminum foil or any buildup of metallic particles should be
kept away from the charger cavities. Always unplug the charger from the power supply when there is
no battery pack in the cavity. Unplug the charger before attempting to clean.
This Class B digital apparatus complies with Canadian ICES-003.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
25 (7.6)
50 (15.2)
6
18
10
18
12
16
16
14
Total length of Cord in Feet (meters)
50 (15.2)
100 (30.5)
American Wire gauge
16
16
16
12
- 09 -
100 (30.5)
150 (45.7)
200 (61.0)
300 (91.4)
16
14
14
12
14
12
Not Recommended

Publicidad

loading