Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly/Adjustment setup
Installing and Removing the Battery Pack (FIG. 3)
1.
NOTE: For best results, make sure your battery pack is fully charged.
To install the battery pack (10) into the tool handle, align the battery pack with the rails inside the
●
tool's handle and slide it into the handle until the battery pack is firmly seated in the tool and
ensure that it does not disengage.
To remove the battery pack from the tool, press the release button (11) and firmly pull the battery
●
pack out of the tool handle. Insert it into the charger as described in the charger section of this
manual.
This machine can be used for manually polishing or waxing, with a higher speed and higher intensity
than a rotary machine. The machine makes excentric movements also called Dual Action. This means
it makes many small oval movements per minute that are comparable to rotating hand movements.
The rotations are ovals which never follow 100% the same track because the polishing pad rotates
feely around the axle. Because the machine has this excentric movement, the chance of holograms,
machine tracks, burn marks and other damage to laquer is much smaller. This contrary to normal
rotating polishing machines or rotary machines.
Handles
This machine is supplied with two handles. The side handle can simply be screwed unto the machine.
The other handle can be used in several ways (see the images below). To change the position of the
handle loosen the screws with the supplied hex key tool. The handle can then be moved to the
desired position.
Position1
Operation
Position2
- 12 -
Position3
Publicidad
