Publicidad
Idiomas disponibles
Idiomas disponibles
Charging a Battery
NOTE: To ensure maximum performance and life of lithium-ion battery packs, charge the battery pack
fully before first use.
1.
Plug the charger into an appropriate outlet before inserting battery pack.
2.
Connect the charger and battery pack, making sure the battery is fully seated. The (charging) light
will blink continuously indicating that the charging process has started.
3.
The completion of charge will be indicated by the light remaining ON continuously. The battery
pack is fully charged and may be removed and used at this time or left in the charger.
Indicator for Charging Process
Refer to the information below for the charge status of the battery pack.
The Red LED always light when the battery is charging.
The Green LED always light if the battery is fully charged
The Battery will not be charged if the battery temperature is deviation. In that case, the Green
LED flashes until the battery cool down to normal temperature.
The battery will never be charged if the battery is damaged. In that case, the red LED always
flashes.
11
12
13
- 11 -
Publicidad
