Publicidad
Idiomas disponibles
Idiomas disponibles
How to use
English
EXTERNAL BUTTONS
Fan mode
1. Press the ON/OFF button, the air conditioner starts to operate.
2. Press the MODE button, select the operation mode Cooling or Heating.
3. Press SPEED button to select fan speed.
You can select the fan speed between LOW, MEDIUM and HIGH.
4. Press the button again, the air conditioner will stop.
Note: In fan operation mode, it is not possible to adjust the temperature.
Dehumidifier mode
1. Press the ON/OFF button, the air conditioner starts to operate.
2. Press the MODE button, select the dry operation mode.
3. Press UP or DOWN button to adjust the temperature, the temperature can be adjusted with a differen-
ce of 1ºC in a range of 16-32ºC.
4. Press the SPEED button to select the fan speed. You can select the fan speed from LOW, MEDIUM, HIGH
and AUTO.
5. Press the button again, the air conditioner stops.
Note: This manual introduces the function for all remote controllers, if you press a button, you may not
get any reaction, then the air conditioner you have purchased does not have this function.
1. "ON/OFF" button
* Press this button, and the unit will start or stop, and you can clear the timer or sleep function of the last
time.
2. "SPEED" button
* Press this button to change the speed:
Lo w
Mi d
High
Aut o
3. UP / DOWN" button
* When the button is pressed, the set temperature will increase by 0.5ºC. Pressing the button will decrea-
se the set temperature by 0.5ºC. * Pressing the button will decrease the set temperature by 0.5ºC.
* The temperature will change rapidly by pressing the button continuously and the setting temperature
range is from 16ºC to 32ºC.
4. COOL" button
* Press the "COOL" button, the operation mode is changed to cooling mode.
5. HEAT" button
* Press the HEAT button to change the operation mode to heating mode.
6. SWING" buttons
* Press this button to open the up/down and left/right swing function, press it again to set the flap posi-
tion.
Press it again to set the flap position.
* The up/down and left/right adjustment is only valid in this mode, so it will not affect the position of the
flap in other modes.
* The up/down and left/right oscillation has memory function. It can keep the primary setting when
power off and then power on or switch from other modes to the primary mode.
117
infiniton.es
Publicidad
