Publicidad
Idiomas disponibles
Idiomas disponibles
How to use
English
9. iFEEL" button
* Press this button to set the iFEEL function.
The LCD will display the actual room temperature when the function is activated and will display the set
temperature when the function is cancelled.
* This function will not be valid when the product is in fan mode.
10. DISPLAY" button
* Press the button once on the display to turn off the display, press it again and the LCD will show the
room temperature and setting temperature after flashing for 5 seconds.
It is convenient for users who are not used to the dark and it is also convenient to check the room tem-
perature at any time.
11. iCLEAN" button
* When the remote control is turned off, press the "iCLEAN" button to make the unit execute the "iCLEAN"
function.
* The purpose of this function is to clean the dust on the evaporator and dry the water inside the evapo-
rator to prevent the evaporator from rotting due to water accumulation and giving off strange smells.
* After setting the "iCLEAN" function, press the "iCLEAN" button or "ON/OFF" button to deactivate the func-
tion.
* The cleaning function will stop working after one hour of operation without any operation.
12. ELE.H" button (only for heat pumps)
* In the heating mode, press this button to change the operating mode to supplementary heating.
13. Anti-FUNGUS" button
* The purpose of this function is to dry the inside of the evaporator and prevent it from becoming mouldy
due to water accumulation, thus dispersing foreign odours.
* This function is controlled by the remote controller in cooling, dehumidifying and automatic modes, the
horizontal air direction rods are set to the initial position for cooling. The air conditioner operates in hea-
ting mode (cooling mode only operates in fan mode). The internal fan runs for 3 minutes in weak wind
before stopping.
* This function is not factory set. You can set and cancel this function freely. The setting method is as fo-
llows: With the air conditioner and the remote controller turned off, point the remote controller at the air
conditioner and press the "Anti-FUNGUS" button continuously.
"After five beeps, the alarm will sound again five times, indicating that the function is activated. In case
this function has been set, unless the entire air conditioner is turned off or the function is manually can-
celled, the air conditioner will have this function by default.
* To cancel the function:
1. With the air conditioner and remote controller off, point the remote controller at the air conditioner and
press the "Anti-FUNGUS" button once, After five beeps, the alarm will sound three times, indicating that
the function has been cancelled;
2. Turn off the air conditioner completely.
119
infiniton.es
Publicidad
