Dell 2003 R2 x64 Edition Guía De Administración página 51

To reinstall the MUI software, perform the following steps:
1 Insert the appropriate Multilingual Support CD for your desired language into the storage server's
CD drive.
2 Run the base operating system installer.
Browse the CD and doubleclick the *.msi file for the language that you wish to install.
a
In the Installer window, select the languages to be installed, and select the default MUI language
b
from the menu.
Click OK to perform the installation.
c
Follow the directions on your screen to complete the installation.
d
Reboot your system.
e
3 Repeat step 1 through step 2 for each additional MUI language.
4 Run the R2 component installer.
Open the readme.txt file and locate the specific installer number for your desired language.
a
Browse the CD and doubleclick the *_R2.msi file number for the language that you wish to install.
b
In the Installer window, select the R2 components to be installed.
c
Click OK to perform the installation.
d
Follow the directions on your screen to complete the installation.
e
Reboot your system.
f
5 Repeat step 4 for each additional MUI language.
Configuring Software RAID
If the operating system is preinstalled on your system, creating a RAID 1 operating system volume
is not required.
If you are reinstalling or upgrading the operating system, perform the following steps from the
Microsoft Management Console (MMC) to configure a RAID 1 volume for the operating system.
1 In the Windows Storage Server Management window, expand the Windows Storage Server
Management (Local) tree.
2 Expand Disk and Volume Management and click Disk Management.
3 In the right window pane, right-click Disk 0 and select Convert to Dynamic Disk.
4 In the Convert to Dynamic Disk window, select the two disks to be mirrored and click OK.
5 In the Disks to Convert window, click Convert.
Restoring Your Operating System
51