Promax -10 Manual Del Usuario página 103

USER'S MANUAL. PROMAX-10
4.2.6.1 Datalogger configuration.
From the LOGGER mode, when
pressing the CONFIG key [14] we will accede
to the configuration menu. This menu permits
to modify the THRESHOLD
parameters. To accede to them turn the rotary selector
and once the parameter we want to change is
appears shadowed, press it; then turning it its
value will be modified. Finally press it again to
validate the new value.
a) THRESHOLD: It activates / deactivates the measurement threshold.
This parameter allows to carry out the logger function in an agile way, by
activating only those measures we consider significative.
In the OFF mode (deactivated) all measurements are taken (with a level
higher than 20 dBµV). On the other hand, when a level is defined, only
those channels with a level higher than the THRESHOLD value will be
measured.
b) MEASURES: It defines the types of measurements to be made.
This parameter allows to select the measurements that are desired to made
between:
04/2004
PROMAX-10
LOGGER NUMBER
DATE: 08:55 12-09-2001
CHANNEL PLAN:
AUDIO: 5.50 MHz (FM)
UNITS:
THRESHOLD:
NOISE FREQ.:
CHAN FREQ V
C23 487.25 76
C25 503.25 53
C27 519.25 81
C29 535.25 59
C31 551.25 78
C34 575.25 67
C37 599.25 54
C38 607.25 57
C39 615.25 62
C41 631.25 71
C43 647.25D 43
C14 70 MER = 33
BER = 8.8E-6
Figure 39.- Example of print.
and MEASURES
10
CCIR
dBuV
OFF
BW/2
V/A C/N
14 52
9 33
16 55
13 39
16 44
11 45
7 34
14 >37
18 >42
14 43
13
Figure 40.- Logger configuration menu.
Page 37