Control Panel
* Depending on the model, some of the following functions may not be available.
Control Panel Features
LED Display
Indicator
Ice Selection
Ice Selection
Press the ice selection button to choose either
cubed or crushed ice. The cubed or crushed ice
icon will illuminate.
Refrigerator Temperature
Refrigerator Temperature
Indicates the set temperature of the refrigerator
compartment in Celsius (°C) or Fahrenheit (°F).
Freezer Temperature
Freezer Temperature
Indicates the set temperature of the freezer
compartment in Celsius (°C) or Fahrenheit (°F).
To change the temperature mode from °F to °C
(or vice versa) press and hold the Refrigerator
and Freezer temperature buttons simultaneously
for approximately five seconds. The temperature
indicator on the display window switches
between Celsius and Fahrenheit.
The displayed temperature is the target
temperature, and not the actual temperature
of the refrigerator. The actual refrigerator
temperature depends on the food inside the
refrigerator.
Fresh Air Filter
Fresh Air Filter
The Fresh Air Filter helps remove odors from the
refrigerator. The Fresh Air Filter has two settings,
Auto and Power(PWR). In Auto mode, the Fresh
Air Filter will cycle on and off in increments of ten
minutes on and one hundred ten minutes off. If
set to the Power(PWR) mode, the Fresh Air Filter
will stay on continuously for four hours, cycling on
and off in increments of ten minutes on and five
minutes off. After four hours, the Fresh Air Filter
Control
will switch back to Auto mode.
Button
NOTE
[
Press the Fresh Air Filter button once for
Power(PWR) mode.
Press the Fresh Air Filter button again to
switch back to Auto mode.
HOW TO USE
27
]
( On some
models)