Publicidad
Idiomas disponibles
Idiomas disponibles
-
Extension cord is in good technical
condition.
• Do not use the charger with damaged cord
or plug. Damage should be repaired by a
qualified person.
• Do not use the charger after it has been hit,
dropped or otherwise damaged. Entrust the
testing and potential repair to authorized
service workshop.
• Do not try to dismantle the charger. All repairs
should be made by an authorized service
workshop. Improper charger assembly may
cause electric shock or fire.
• Disconnect the charger from power supply
before starting any maintenance or cleaning.
• In case of battery damage or improper use
it may produce gas. Ventilate room and
seek medical attention in case of medical
symptoms.
• Keep the charger clean. Dirt can be the cause
of electric shock.
• Do not use charger when placed on
flammable surface (e.g. paper, textiles) or in
proximity of flammable substance. Greater
charger temperature when charging increases
risk of fire.
When the charger is not in use, it should be
disconnected from mains network.
CAUTION! This device is designed to operate
indoors.
The design is assumed to be safe, protection
measures and additional safety systems are
used, nevertheless there is always a small risk
of injuries at work.
Li-Ion batteries may leak, set on fire or explode
when heated to high temperature or short-
circuited. Do not store the batteries in a car in
hot and sunny days. Do not open the battery.
Li-Ion batteries contain electronic protection
devices that, if damaged, may cause fire or
explosion of the battery.
Explanation of used symbols
1
4
7
Max.
50°C
10
Read the instruction manual, observe
1,2.
warnings and safety conditions therein.
Use protective goggles and hearing
3.
protectors.
Keep the tool away from children.
4.
Protect against rain.
5.
Device with class II insulation.
6.
Disconnect the power cord before starting
7.
maintenance or operation.
Use indoors, protect from water and
8.
moisture.
Do not throw into fire.
9.
Maximum permissible cell temperature.
10.
Recycling
11.
DESIGN AND INTENDED USE
The drill/driver is a cordless power tool. Its drive is
a commutator DC motor with fixed magnets and
a planetary gearbox. The drill/driver is intended
for driving in and out screws and bolts in wood,
metal, plastic, and ceramics, and for drilling holes
15
2
3
5
6
9
8
11
Publicidad
