Biral ModulA RED Serie Instrucciones De Instalación Y Funcionamiento página 15

4. Installation
4.1 General notes
ModulA is only intended for installation indoors. The pumps must be mounted voltage-free
so that no energy can be transferred from the pipes to the pump casing. The pumps can be
installed directly in the pipe, provided the pipes are designed for the weight of the pump.
Installation is only possible after completion of all welding and soldering work on the system.
Avoid drops of water on the pump motor, especially the frequency converter.
Warning
The local regulations for the lifting and carrying
of loads must be adhered to. The weight of the
pump is given on the packaging.
4.2 Flushing heating equipment (for extended pump)
To avoid unwanted interruptions to operations and non-running of the pump after longer
periods of inactivity, we recommend thoroughly flushing out the equipment following the
new installation or adaptation of heating and refilling.
The equipment must correspond with the latest technology. (Placement of expansion vessel
or safety flow).
4.3 Installation
Install only after completion of all welding or soldering work on the equipment. Water drops
should be avoided on the pump motor, especially on the electronics. The pump casing should
be installed voltage-free in the equipment.
4.4 Permissible installation positions
– The installation position of the rotor shaft must always be horizontal.
961569_00
Rauhwerte Ra 12.5 6.3 3.2 1.6 0.8 0.4
Rauheitsklassen N10 N9 N8 N7 N6 N5
Stück Gegenstand
Änd.Index Datum Visum
II I
ModulA
Motor waagrecht
für BA
Biral AG
CH-3110 Münsingen
Allgemeintoleranzen ISO 2768-mK
0.5 bis 6 über 6 bis 30 über 30 bis 120 über 120 bis 400
± 0.1 ± 0.2 ± 0.3 ± 0.5
1
Pos Material
Modell/Art.Nr
Ersetzt durch: Ersatz für:
Massstab
gezeichnet
1:4
geprüft
Freigabe
PDM_Nr
Zeichnungsnummer
961569
english 15
|
über 400 bis 1000
± 0.8
Bemerkung
05.10.2012 ts
15.02.2013 ts
15.02.2013 ts
TD-0020538
Änd.Index
00