10.2 Biral interface module, BIM A2 signal module
(for self-regulating pumps)
– Operations or ready signal
– External minimum speed
– Dual pump function
Note: Not possible in combination with control module
Connection drawing
10, 13 External minimum speed with closing contact
61, 64 Operations or ready signal (can be switched over)
As a closing contact: closes on operation / ready signal
61, 62 Operation or ready signal (can be switched over)
As an opening contact: opens for operation / ready signal
91, 92 Dual pump function
10.3 Biral interface module, BIM B2 control module
(for controlled pumps)
– External speed specification, 0 –10 V / 0 – 20mA
– PWM/multitherm interface
– Dual pump function
Note: Not possible in combination with signal module
Connection drawing
81, 82 Multitherm / PWM interface for external speed specification
71, 72 Analogue input 0...10 V or 0...20 mA for external speed
specification
91, 92 Dual pump function
10.4 Building set for recessed installation of electronics
Media temperature up to +110 °C.
Ambient temperature: max. 40 °C
Pump can be insulated up to 100 °C media temperature
operating instructions, see «Building set for wall installation»
(08 0441.2011)!
10.5 Cold water pump version
Pump with condensation-resistant colour paint in recessed design
for use in air-conditioning units and heat pumps.
For use when condensation forms (media temperature lower
than ambient temperature). See operating instructions,
«ModulA GREEN» (08 0439.2011)!
Änd.Index
Datum
Visum
II
I
ModulA
Anschlusschema
BIM A2
Biral AG
CH-3110 Münsingen
Änd.Index
Datum
II
I
ModulA
Anschlusschema
BIM B2
Biral AG
CH-3110 Münsingen
english
961561_00
91
92
13
10
61
62
max. 250V AC
min. 5V DC
Ersetzt durch:
Massstab
961562_00
1:1
81
82
71
72
91
92
961561
Visum
Ersetzt durch:
Massstab
1:1
961562
35
|
64
2A
20 mA
Ersatz für:
gezeichnet 25.01.2013
ts
geprüft
12.02.2013
ts
Freigabe
12.02.2013
ts
PDM_Nr
TD-0021438
Zeichnungsnummer
Änd.In
00
Ersatz für:
gezeichnet 25.01.2013
ts
geprüft
12.02.2013
ts
Freigabe
12.02.2013
ts
PDM_Nr
TD-0021440
Zeichnungsnummer
Änd.In
00