Tineco FLOOR ONE S7 Serie Manual De Uso página 42

Brush Roller Self-cleaning
Brush Roller Cover
②
Squeeze latches on the cover and pull upward to
remove.
When replacing, always latch the brush cover into
place to avoid leakage.
1. Place the appliance on the charging base after use, the
2. Press the self-cleaning button and you can select the
3. Once complete, please clean the Dirty Water Tank.
Note:
• Ensure the charging base is plugged in and the battery
level 20%.
• Before self-cleaning cycle, please clean the DWT and
ensure the water level in the CWT exceeds 40%.
①
sensor will auto-detect the level of dirt.
Quick Self-cleaning (takes 2 minutes) or Super Self-
cleaning (takes 6 minutes) to begin the process.
And the appliance will begin charging.
Rinse with water.
40