cecotec bolero DRESSCODE 7300 Inverter A Manual De Instrucciones página 97

Washing the tap filter. Fig. 22
1. Close the water supply tap.
2. Remove the water supply hose from the tap.
3. Clean the filter with a soft brush.
4. Loosen the water supply hose from the rear part of the washing machine. Remove the
filter with a pair of fine-tipped clippers, taking care not to damage it.
5. Use a soft brush to clean the filter.
6. Return the filter to its original position and connect the hose.
7. Clean the filter every 3 months to guarantee optimum functioning.
Cleaning the detergent dispenser tank. Fig. 23
1. Remove the detergent dispenser tank.
2. Press down the arrow on the softener cover inside the dispenser drawer.
3. Lift the clip up and take out the softener cover and wash all grooves with water.
4. Place the softener cover again and push it gently to introduce it in the detergent
dispenser in place.
Warning
- Do not use alcohol, solvents or chemical products to clean the detergent dispenser.
Clean the tank about every 3 months.
-
Cleaning the drain pump filter. Fig. 24
Warning
Be careful with the hot water!
-
- Allow any possible water remains to cool down.
Unplug the machine to avoid electrical shock before washing.
-
- The drain pump filter can filter the yarns and small foreign matters from the washing.
Clean the filter periodically to ensure proper operation of the washing machine.
-
- Open the bottom cover.
Remove the filter by turning it counterclockwise.
-
- Be careful, empty the water with a suitable container.
Remove dust, dirt and other substances or objects.
-
- Place the filter again in its original position by turning it in the other sense.
Open the lower cover cap.
-
Warning
- Make sure that the filter is reinstalled correctly.
Rotate the lower cover cap (filter) so water runs directly into a suitable container.
-
- When the appliance is in use and depending on the programme selected there can be hot
water in the pump. Do not remove the lower cover during the wash cycle, always wait
until the appliance has finished the cycle and is empty.
When replacing the cover, ensure it is securely re-tightened.
-
BOLERO DRESSCODE 7300/8300/9300/10300
ENGLISH
97