Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLING AND USING THE SHOULDER STRAP
WARNING:
operating the unit as a pole saw.
Assembling the Shoulder Strap
1. Push the strap up through the center slot in the buckle (Fig. 5).
2. Bend the strap over and push it down through the lower slot in the buckle (Fig. 5).
Using the Shoulder Strap
1. Put the shoulder strap over the operator's head and onto the left shoulder.
2. Start the unit. Refer to Starting and Stopping.
3. Snap the clip onto the shoulder strap loop (Fig. 6A or Fig. 6B).
4. Adjust the shoulder strap to fit the operator (Fig. 7). Pull the buckle up to loosen the shoulder strap.
Pull the strap down to tighten the shoulder strap.
Buckle
A
To avoid serious personal injury, always use the shoulder strap when
Strap
Clip
Shoulder
Strap Loop
Lower Slot
Fig. 5
Fig. 6
22
Center Slot
Clip
Clip
Shoulder
Strap Loop
B
Publicidad
