Publicidad
Idiomas disponibles
Idiomas disponibles
Chain-Tensioning Screw
Correct Tension
SETTING THE CHAIN OIL ADJUSTMENT SCREW
WARNING:
hole becomes clogged, or the saw chain fails to receive proper lubrication in any way, the saw
chain will overheat. This can cause irreparable damage to the unit and serious personal injury.
Lubricating oil will automatically flow from the chain oil reservoir onto the saw chain during operation.
Use the chain oil adjustment screw to adjust the flow of oil:
1. Insert a 3/32-inch Allen wrench into the chain oil adjustment screw (Fig. 22).
•
Turn the chain oil adjustment screw counterclockwise to increase the oil flow.
•
Turn the chain oil adjustment screw clockwise to reduce the oil flow.
Incorrect Tension
If the chain oil reservoir becomes empty, the chain oil adjustment screw
Loosen
Tighten
Fig. 20
Fig. 21
36
Publicidad
